Unsupported browser

For a better experience please update your browser to its latest version.

Your browser appears to have cookies disabled. For the best experience of this website, please enable cookies in your browser

We'll assume we have your consent to use cookies, for example so you won't need to log in each time you visit our site.
Learn more

AHRI releases heat pump flammable refrigerants report

The Air-Conditioning, Heating, and Refrigeration Institute (AHRI) has released the findings of a risk assessment into the use of flammible refrigerants in heat pumps

The study, entitled Risk Assessment of Residential Heat Pump Systems Using 2L Flammable Refrigerants, concluded that there is a very low risk of ignition from the use of R-32, HFO-1234yf, or HFO-1234ze in ducted residential split heat pump systems.

“One of AHRI’s core goals is to keep consumers safe when using HVACR and water heating products,” said AHRI President and CEO Stephen Yurek. “This thorough study found that the ignition risk associated with these refrigerants is significantly lower than with other common hazard events, and is well below the risk level commonly accepted by the public in general.”

The study investigated four locations within a residence for installing the indoor air handler, including the basement, garage, attic, and utility closet.

Computational fluid dynamics simulation and validation tests were conducted to understand refrigerant dispersion patterns, and the study evaluated seven refrigerant leak scenarios.

The fault tree analysis in this study only considered refrigerant ignition and did not determine whether a fire would ensue due to the ignition of surrounding materials.

The report is available on AHRI’s website, at www.ahrinet.org/technical+results.aspx

AHRI is the US trade association representing manufacturers of air conditioning, heating, commercial refrigeration, and water heating equipment.


Have your say

You must sign in to make a comment

Please remember that the submission of any material is governed by our Terms and Conditions and by submitting material you confirm your agreement to these Terms and Conditions.

Links may be included in your comments but HTML is not permitted.